Manufacturing And Production Technology MCQ Questions & Answers | Mechanical Engineering

A. Above the line joining the two wheel centres

B. Below the line joining the two wheel centres

C. On the line joining the two wheel centres

D. At the intersection of the line joining the wheel centres with the work place plane

A. Minimum at the beginning of the cut and maximum at the end of the cut

B. Maximum at the beginning of the cut and minimum at the end of the cut

C. Uniform throughout the cut

D. None of these

A. Minimum at the beginning of the cut and maximum at the end of the cut

B. Maximum at the beginning of the cut and minimum at the end of the cut

C. Uniform throughout the cut

D. None of these

A. Single riveted

B. Double riveted

C. Both (A) and (B)

D. None of these

A. No relative motion occurs between them

B. No wear of tool occurs

C. No power is consumed during metal cutting

D. No force between tool and work occurs

A. Has no effect on

B. Increase

C. Decrease

D. None of these

A. Made by cold pressing of aluminium oxide powder

B. Available in the form of tips

C. Brittle and have low bending strength

D. All of these

A. Truing

B. Dressing

C. Facing

D. Clearing

A. $${{\text{V}}^{\text{n}}}{\text{T}} = {\text{C}}$$

B. $${\text{V}}{{\text{T}}^{\text{n}}} = {\text{C}}$$

C. $$\frac{{{{\text{V}}^{\text{n}}}}}{{\text{T}}} = {\text{C}}$$

D. $$\frac{{\text{V}}}{{{{\text{T}}^{\text{n}}}}} = {\text{C}}$$

A. Incomplete penetration

B. Shrinkage void

C. Slag Entrapment (Inclusions)

D. Incomplete fusion