You want to totally reinitialize the router and replace the current running-config with the current startup-config. What command will you use?
A. replace run start
B. copy run start
C. copy start run
D. reload
Answer: Option D
Solution(By Examveda Team)
To completely replace the running-config with the startup-config, you must reload the router. Note : You may have picked option C, which isn't a bad answer. Remember, though, it doesn't replace the configuration, it appends it.Which of the following commands sets the secret password to Cisco?
A. enable secret password Cisco
B. enable secret cisco
C. enable secret Cisco
D. enable password Cisco
A. You need to be in privileged mode.
B. You cannot have a space between serial and 0/0.
C. The router does not have a serial0/0 interface.
D. Part of the command is missing.
A. 1, 2 and 4
B. 2, 3 and 5
C. 3 and 4 only
D. None of the above
A. If no command has been typed in 35 seconds, the console connection will be closed.
B. If no router activity has been detected in 1 hour and 35 minutes, the console will be locked out.
C. If no commands have been typed in 1 minute and 35 seconds, the console connection will be closed.
D. If you're connected to the router by a Telnet connection, input must be detected within 1 minute and 35 seconds or the connection will be closed.
Join The Discussion