Automobile Engine MCQ Questions & Answers | Automobile Engineering

A. 0.32

B. 0.032

C. 0.0032

D. 1.32

A. $$\eta = 1 - {1 \over {{R^{r - 1}}}}\left( {{{{\rho ^r} - 1} \over {r\left( {\rho - 1} \right)}}} \right)$$

B. $$\eta = 1 - {1 \over {{R^{r - 1}}}}$$

C. $$\eta = 1 - {1 \over {{R^{r - 1}}}}\left( {{{r\left( {\rho - 1} \right)} \over {{\rho ^r} - 1}}} \right)$$

D. None of the above

A. Hydrochloric acid

B. Sulphuric acid

C. Nitric acid

D. Lead peroxide

A. The bearing is plated with an alloy to ensure good embeddability

B. Each half of a split bearing is made slightly smaller than an exact half

C. Each half of the spilt bearing is made slightly larger than an exact half

D. One of the two bearing halves is made slightly larger than an exact half

A. Permancent magnet, ignition coil and electronic control unit

B. Permanent magnet, reluctor and electronic control unit

C. Ignition coil, reluctor and electronic control unit

D. Permmanent magnet, reluctor and timer coil

A. Slip angle

B. Castor angle

C. Camber

D. Kingpin inclination

A. Master cylinder

B. Push rod

C. Wheel cylinder

D. Brake pedal

A. 1 is alone is true

B. 3 is alone is true

C. 1 and 3 both are true

D. 1, 2, 3, 4 all are true

A. Reduces the stopping distance

B. Minimizes the brake fade

C. Maintains directional control during braking by preventing the wheels from locking

D. Prevents nose dives during braking and thereby postpones Iocking of the Wheels

A. 0

B. 1

C. 2

D. 4