11. The dust collection efficiency of electrostatic precipitator increases with increase in the
12. If 'D' is the inside diameter of the shell of a shell and tube heat exchanger, then the baffle spacing is usually in the range of
13. The minimum baffle height should be
14. Movement of pipeline caused by thermal expansion is taken care by providing
15. What is the slope of the operating line in the stripping section of a distillation column?
16. Correct use of 'factor of safety' is very important in equipment design. It is defined as the ratio of the
17. The minimum plate spacing in most of the pertroleum refinery distillation columns (of dia > 3 ft) is normally __________ inches.
18. The minimum tray spacing in distillation column of diameter less than 3 ft is normally __________ inches.
19. A head comprises of straight flange section, corner torus, section and central dished section. Crown radius and knuckle radius in a head is related respectively to the
20. The clearance between two tubes in a shell and tube heat exchanger is known as 'ligament', whose minimum value is __________ the outside diameter of the tube, but in no case it should be less than 4.5 mm.
Read More Section(Process Equipment and Plant Design)
Each Section contains maximum 100 MCQs question on Process Equipment and Plant Design. To get more questions visit other sections.