11. Filtration rate is affected by the
12. In distillation columns, bubble caps are held in place over trays by
13. __________ strain is measured using a 'strain rosetter'.
14. In case of a continuous distillation column, increase in reflux ratio may result in the
15. Pressure drop (Δp) and the superficial gas mass velocity (G) in case of packed absorption tower operating in the preloading range are related as
16. The ratio of shear stress to shear strain is called
17. For a 25 mm hole drilled in plates to be rivetted, the shank diameter of the rivet should be __________ mm.
18. In hydrostatic testing of welded pipe (for leakage, strength etc.) the ratio of minimum hydrostatic test pressure to internal design pressure is around
19. Tube side heat transfer co-efficient for turbulent flow of liquid through tubes is proportional to
20. With increase in temperature drop (in a shell and tube heat exchanger), the LMTD correction factor, FT
Read More Section(Process Equipment and Plant Design)
Each Section contains maximum 100 MCQs question on Process Equipment and Plant Design. To get more questions visit other sections.