71. Pick up the true statement from the following:
72. If ‘p’ is the net upward pressure on a square footing of side ‘b’ for a square column of side ‘a’, the maximum bending moment is given by
73. The toe projection of foundation slabs is taken
74. The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is
75. In a doubly-reinforced beam if ‘c’ and ‘t’ are stresses in concrete and tension reinforcement, ‘d’ is the effective depth and ‘n’ is depth of critical neutral axis, the following relationship holds good
76. The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle θ° with horizontal where θ° is
77. The width of the flange of a L-beam, should be less than
78. The width of the flange of a T-beam should be less than
79. A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is
80. If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be.
Read More Section(RCC Structures Design)
Each Section contains maximum 100 MCQs question on RCC Structures Design. To get more questions visit other sections.