Time Response Of Reactive Circuits MCQ Questions & Answers | Electrical Engineering Page-2 section-1

11.
When a 12 V input pulse with a width equal to one time constant is applied to an RC integrator, the capacitor charges to.

A. 0 V

B. 12 V

C. 6.3 V

D. 7.56 V

Answer & Solution Discuss in Board Save for Later

12.
When a 24 V input pulse with a width equal to five time constants is applied to an RC integrator, the capacitor charges to

A. 24 V

B. 15.12 V

C. 20.64 V

D. 12 V

Answer & Solution Discuss in Board Save for Later

13.
When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to

A. 15 V

B. 12.9 V

C. 8.6 V

D. 19.45 V

Answer & Solution Discuss in Board Save for Later

14.
Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

A. 0 V

B. 15 V

C. 6.3 V

D. 9.45 V

Answer & Solution Discuss in Board Save for Later

15.
In an RC integrating circuit, the output voltage is taken across the capacitor.

A. True

B. False

Answer & Solution Discuss in Board Save for Later

16.
With an RL integrator, at the instant of the rising pulse edge,

A. All the input voltage is across the resistor

B. All the input voltage is across the inductor

C. 63 percent of the input voltage is across the resistor

D. 63 percent of the input voltage is across the inductor

Answer & Solution Discuss in Board Save for Later

17.
An RC differentiator acts as a

A. Low-pass filter

B. High-pass filter

C. Band-pass filter

D. Band-stop filter

Answer & Solution Discuss in Board Save for Later

18.
The rising and falling edges of a pulse waveform contain the higher frequency component.

A. True

B. False

Answer & Solution Discuss in Board Save for Later

19.
A single 6 V pulse with a width of 600 μs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 μF capacitor. To what voltage will the capacitor charge?

A. 0 V

B. 3.78 V

C. 5.16 V

D. 6 V

Answer & Solution Discuss in Board Save for Later

20.
An integrator consists of a 3.3 kΩ resistor and a 2 μF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?

A. 10.3 V

B. 30 V

C. 12.09 V

D. 17.91 V

Answer & Solution Discuss in Board Save for Later

Time Response Of Reactive Circuits MCQ Questions & Answers | Electrical Engineering

11. When a 12 V input pulse with a width equal to one time constant is applied to an RC integrator, the capacitor charges to.

Answer & Solution

12. When a 24 V input pulse with a width equal to five time constants is applied to an RC integrator, the capacitor charges to

Answer & Solution

13. When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to

Answer & Solution

14. Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

Answer & Solution

15. In an RC integrating circuit, the output voltage is taken across the capacitor.

Answer & Solution

16. With an RL integrator, at the instant of the rising pulse edge,

Answer & Solution

17. An RC differentiator acts as a

Answer & Solution

18. The rising and falling edges of a pulse waveform contain the higher frequency component.

Answer & Solution

19. A single 6 V pulse with a width of 600 μs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 μF capacitor. To what voltage will the capacitor charge?

Answer & Solution

20. An integrator consists of a 3.3 kΩ resistor and a 2 μF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?

Answer & Solution

11.
When a 12 V input pulse with a width equal to one time constant is applied to an RC integrator, the capacitor charges to.

12.
When a 24 V input pulse with a width equal to five time constants is applied to an RC integrator, the capacitor charges to

13.
When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to

14.
Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.

15.
In an RC integrating circuit, the output voltage is taken across the capacitor.

16.
With an RL integrator, at the instant of the rising pulse edge,

17.
An RC differentiator acts as a

18.
The rising and falling edges of a pulse waveform contain the higher frequency component.

19.
A single 6 V pulse with a width of 600 μs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 μF capacitor. To what voltage will the capacitor charge?

20.
An integrator consists of a 3.3 kΩ resistor and a 2 μF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?