61. A disturbing mass m1 attached to the rotating shaft may be balanced by a single mass m2 attached in the same plane of rotation as that of m1, such that (where r1 and r2 are the radii of rotation of m1 and m2 respectively)
62. The maximum fluctuation of energy is the
63. The Kutzbach criterion for determining the number of degrees of freedom (n) is (where $$l$$ = number of links, j = number of joints and h = number of higher pairs)
64. The example of lower pair is
65. Which of the following is an example of sliding pair?
66. The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the anticlockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)
67. The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the clockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)
68. The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in
69. The equation of motion for a single degree of freedom system with viscous damping is $$4\frac{{{{\text{d}}^2}{\text{x}}}}{{{\text{d}}{{\text{t}}^2}}} + 9\frac{{{\text{dx}}}}{{{\text{dt}}}} + 16{\text{x}} = 0.$$ The damping ratio of the system is
70. Crowning on pulleys helps
Read More Section(Theory of Machine)
Each Section contains maximum 100 MCQs question on Theory of Machine. To get more questions visit other sections.