61. The radial distance from the top of a tooth to the bottom of a tooth in a meshing gear, is called
62. Flexible coupling is used because
63. In its simplest form, a cam mechanism consists of following number of links
64. The steering of a ship means
65. In a reciprocating steam engine, when the crank has turned from inner dead center through an angle $$\theta $$, the angular velocity of the connecting rod is given by
66. The Klein's diagram is used when
67. Two heavy rotating masses are connected by shafts of lengths $${l_1},\,{l_2}$$ and $${l_3}$$ and the corresponding diameters are d1, d2 and d3. This system is reduced to a torsionally equivalent system having uniform diameter d = d1 of the shaft. The equivalent length of the shaft is
68. The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft and $$\tan \varphi $$ = Coefficient of friction between the shaft and bearing)
69. Any point on a link connecting double slider crank chain will trace a
70. The method of obtaining different mechanisms by fixing in turn different links in a kinematic chain, is known as
Read More Section(Theory of Machine)
Each Section contains maximum 100 MCQs question on Theory of Machine. To get more questions visit other sections.