71. What shall be the minimum distance between the detaching hook & the detaching plate where a geared engine is used and the cage is at its normal position at the top of the shaft?
72. What is the minimum number of persons to be employed when the owner, Agent or Manager shall constitute a Safety Committee for promoting safety in the mine?
73. What is the least number of stop-block to be installed at the top of every inclined plane to arrest tubs from running out of control?
74. State the number of the schedule that must be followed for the refresher course of rescue trained person
75. No person shall go into work in a mine unless he wears . . . . . . . .
76. In which register the reportable & minor accidents are recorded?
77. What should be the maximum temperature of the white metal pouring into the socket for the purpose of capping?
78. The representative factor of sampling plan not less than . . . . . . . .
79. It stone drift, after shots have been fired, all loose rock shall be removed from the face, area lying within a distance of . . . . . . . . m from the face shall be thoroughly cleaned or washed down and carefully examined for presence of sockets.
80. The steps shall be provided in every place where the inclination exceeds . . . . . . . . from horizontal.
Read More Section(Mine Legislation and General Safety)
Each Section contains maximum 100 MCQs question on Mine Legislation and General Safety. To get more questions visit other sections.