A digital displacement indicator based on a linear voltage differential transformer (LVDT) transducer and A/D conversion used a LVDT with a sensitivity of 1 mV/mm. If the smallest displacement to be measured is 0.1 mm and the maximum displacement of the LVDT core is 10 cm, then the digital display required for the instrument has to be
A. 2 digit type
B. $$2\frac{1}{2}$$ digit type
C. 3 digit type
D. $$3\frac{1}{2}$$ digit type
Answer: Option C
This Question Belongs to Electronics And Communications Engineering >> Measurement And Instrumentation
The spring material used in a spring control device should have the following property.
A. Should be nonmagnetic
B. Most be of low temperature coefficient
C. Should have low specific resistance
D. All of the above
Why is a MISC meter not recommended for DC measurement?
A. The meter is calibrated for AC and it’s error for DC would be high
B. The meter does not respond to DC signals
C. The error is high due to hysteresis effect
D. The error is high due to eddy current effect
A moving iron ammeter may be compensated for frequency errors by
A. A shunt resistance
B. A series inductance
C. Shunt capacitance
D. Series resistance
Join The Discussion