Friction factor for turbulent flow in a new pipe is given by
A. $${\text{f}} = \frac{{16}}{{{{\text{N}}_{{\text{Re}}}}}}$$
B. $${\text{f}} = \frac{{0.04}}{{{{\text{N}}_{{\text{Re}}}}^{0.16}}}$$
C. $${\text{f}} = 0.22\,{{\text{N}}_{{\text{Re}}}}^{0.5}$$
D. $${\text{f}} = \frac{{25}}{{{{\text{N}}_{{\text{Re}}}}}}$$
Answer: Option B
This Question Belongs to Chemical Engineering >> Process Equipment And Plant Design
Width and depth of grooves in the tube sheet holes normally are __________ inch respectively.
A. $$\frac{1}{8}$$ and $$\frac{1}{{64}}$$
B. $$\frac{1}{{64}}$$ and $$\frac{1}{8}$$
C. $$\frac{1}{2}$$ and 8
D. $$\frac{1}{2}$$ and 5
A. Less than
B. 1.25-1.50 times
C. 2.5 times
D. One-fourth of
Value of Peclet number = 0, is the representative of
A. Laminar flow
B. Complete back mixing
C. Plug flow
D. Eddy diffusivity = 0
Join The Discussion