The absolute minimum radius of curve for safe operation for a speed of 110 kmph is
A. 110 m
B. 220 m
C. 440 m
D. 577 m
Answer: Option C
This Question Belongs to Civil Engineering >> Highway Engineering
Join The Discussion
Comments ( 6 )
Highway facilities are designed for
A. annual average hourly volume
B. annual average daily traffic
C. thirtieth highest hourly volume
D. peak hourly volume of the year
The provision of traffic signals at intersections
A. reduces right angled and rear end collisions
B. increases right angled and rear end collisions
C. reduces right angled collisions but may increase rear end collisions
D. reduces rear end collisions but may increase right angled collisions
In CBR test the value of CBR is calculated at
A. 2.5 mm penetration only
B. 5.0 mm penetration only
C. 7.5 mm penetration only
D. both 2.5 mm and 5.0 mm penetrations
If aggregate impact value is 20 to 30 percent, then it is classified as
A. exceptionally strong
B. strong
C. satisfactory for road surfacing
D. unsuitable for road surfacing
=357m
V=30.5m/sec
e=0.07
f=0=15
g=9.81
e+f=v2/gR
Substitute all values u will get nearly 431m
So answerr is nearest value 440m
V²/127(e+f)
110²/127(0.07+0.15) =433
Hence 440
Wrong ans
The value of R?
e+f = v sq./127R
= 110*110/127*(0.07+0.15)
433 ~440