The purpose of a gate is to
A. Delivers molten metal into the mould cavity
B. Act as a reservoir for the molten metal
C. Feed the molten metal to the casting in order to compensate for the shrinkage
D. Delivers molten metal from pouring basin to gate
Answer: Option A
Solution(By Examveda Team)
The purpose of a gate is to delivers molten metal into the mould cavity.A proper method of gating system is that it leads the pure molten metal to flow through a ladle to the casting cavity, which ensures proper and smooth filling of the cavity. This depends on the layout of the gating channels too, such as the direction and the position of the runner, sprue and ingates.
Related Questions on Workshop Technology
The brass and bronze are welded by _________ flame.
A. Neutral
B. Oxidizing
C. Carburising
D. All of these
In TIG arc welding, the welding zone is shielded by an atmosphere of
A. Helium gas
B. Argon gas
C. Either (A) or (B)
D. None of these
In sheet metal blanking, shear is provided on punches and dies so that
A. Press load is reduced
B. Good cut edge is obtained
C. Warping of sheet is minimized
D. Cut blanks is straight
Join The Discussion