The tail stock set over method of taper turning is preferred for
A. Internal tapers
B. Small tapers
C. Long slender tapers
D. Steep tapers
Answer: Option C
Solution(By Examveda Team)
Taper Turning can be done in Lathe by tailstock setover method, in which the tailstock is moved from its middle position to one side of the bed, making the work-piece tilted wrt the lathe axis and feed. Thus, when the tool moves, it cut the workpiece at an angle to its axis, creating a taper. The tail stock set over method of taper turning is preferred for Long slender tapersJoin The Discussion
Comments ( 3 )
Related Questions on Manufacturing and Production Technology
The carbide tools operating at very low cutting speeds (below 30 m/min)
A. Reduces tool life
B. Increases tool life
C. Have no effect on tool life
D. Spoils the work piece
The type of reamer used for reaming operation in a blind hole, is
A. Straight fluted reamer
B. Left hand spiral fluted reamer
C. Right hand spiral fluted reamer
D. Any one of these
High speed steel tools retain their hardness up to a temperature of
A. 250°C
B. 350°C
C. 500°C
D. 900°C
Tail Stock Set Over Method is used when the workpiece having large slender parts but the taper is done small
Tail Stock Set Over Method is used when the workpiece having large slender parts but the taper is done small
tape4 turning attachnent can also be used in lathe for taper turning of very large component