A full wave rectifier with a centre tapped transformer supplies dc current of 100 mA to a load resistance of 20Ω. The secondary resistance of transformer is 1Ω. Each diode has a forward resistance of 0.5Ω. What are rms values of signal voltage across each half of the secondary as well as dc power supplied to the load?

The action of JFET in its equivalent circuit can best be represented as a

A. Current controlled Current source

B. Current controlled voltage source

C. Voltage controlled voltage source

D. Voltage controlled current source

In a CB amplifier the maximum efficiency could be

A. 99%

B. 85%

C. 50%

D. 25%

In a p⁺n junction diode under reverse bias, the magnitude of electric field is maximum at

A. The edge of the depletion region on the p-side

B. The edge of the depletion region on the n-side

C. The p⁺n junction

D. The center of the depletion region on the n-side

To prevent a DC return between source and load, it is necessary to use

A. Resistor between source and load

B. Inductor between source and load

C. Capacitor between source and load

D. Either A or B