As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
Answer: Option C
This Question Belongs to Civil Engineering >> Airport Engineering
Join The Discussion
Comments ( 1 )
As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Effective length of a runway is the distance between
A. Ends of the runway
B. Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C. Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D. Ends of the clear way on either side
The size of landing area for multi engine helicopters operating under 1 FR conditions is
A. 22.5 m × 22.5 m
B. 30 m × 30 m
C. 22.5 m × 30 m
D. 60 m × 120 m
As per ICAO recommendation, the minimum width of a safety area for instrumental runway should be300 meters.
For non - instrumental runway, the width of safety area should be atleast 150 m for A, B, C and 78 m for D and E type.
Safety Area Consists of the runway, which is paved area plus the shoulder on either side of runway plus the area that is cleared, graded and drained.
Instrumental runway - Runway which is equipped with visual and electronic navigational aids permitting the landing under conditionof poor visibility.