During short circuit test iron losses are negligible because
A. the current on secondary side is negligible
B. the voltage on secondary side does not vary
C. the voltage applied on primary side is low
D. full-load current is not supplied to the transformer
Answer: Option C
This Question Belongs to Electrical Engineering >> Transformers
Join The Discussion
Comments ( 1 )
The purpose of providing an iron core in a transformer is to
A. provide support to windings
B. reduce hysteresis loss
C. decrease the reluctance of the magnetic path
D. reduce eddy current losses
A good voltage regulation of a transformer means
A. output voltage fluctuation from no load to full load is least
B. output voltage fluctuation with power factor is least
C. difference between primary and secondary voltage is least
D. difference between primary and secondary voltage is maximum
If the percentage impedances of the two transformers working in parallel are different, then
A. transformers will be overheated
B. power factors of both the transformers will be same
C. parallel operation will be not possible
D. parallel operation will still be possible, but the power factors at which the two transformers operate will be different from the power factor of the common load
An ideal transformer will have maximum efficiency at a load such that
A. copper loss = iron loss
B. copper loss < iron loss
C. copper loss > iron loss
D. none of the above
We know iron loss depends on applied voltage. As applied voltage in primary side during SC test is very low hence iron loss also very small.