If K is a constant depending upon the ratio of the width of the slab to its effective span $$l$$, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
A. $$\frac{{\text{K}}}{{\text{x}}}\left( {1 + \frac{{\text{x}}}{{\text{d}}}} \right) + {\text{bw}}$$
B. $${\text{Kx}}\left( {1 - \frac{{\text{x}}}{l}} \right) + {\text{bw}}$$
C. $${\text{Kx}}\left( {1 + \frac{{\text{x}}}{l}} \right) + {\text{bw}}$$
D. All the above
Answer: Option B
This Question Belongs to Civil Engineering >> RCC Structures Design
Distribution of shear intensity over a rectangular section of a beam, follows:
A. A circular curve
B. A straight line
C. A parabolic curve
D. An elliptical curve
If the shear stress in a R.C.C. beam is
A. Equal or less than 5 kg/cm2, no shear reinforcement is provided
B. Greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided
C. Greater than 20 kg/cm2, the size of the section is changed
D. All the above
In a pre-stressed member it is advisable to use
A. Low strength concrete only
B. High strength concrete only
C. Low strength concrete but high tensile steel
D. High strength concrete and high tensile steel
In a simply supported slab, alternate bars are curtailed at
A. $${\frac{1}{4}^{{\text{th}}}}$$ of the span
B. $${\frac{1}{5}^{{\text{th}}}}$$ of the span
C. $${\frac{1}{6}^{{\text{th}}}}$$ of the span
D. $${\frac{1}{7}^{{\text{th}}}}$$ of the span
Join The Discussion