In order to increase the bandwidth of tuned amplifiers, one can use:
1. Tuned circuit with inductance having high Q factor
2. Double tuned amplifier with two tuned circuits coupled by mutual inductance
3. Staggered tuned amplifiers in which different tuned circuits which are cascaded are tuned to slightly different frequencies

The action of JFET in its equivalent circuit can best be represented as a

A. Current controlled Current source

B. Current controlled voltage source

C. Voltage controlled voltage source

D. Voltage controlled current source

In a CB amplifier the maximum efficiency could be

A. 99%

B. 85%

C. 50%

D. 25%

In a p⁺n junction diode under reverse bias, the magnitude of electric field is maximum at

A. The edge of the depletion region on the p-side

B. The edge of the depletion region on the n-side

C. The p⁺n junction

D. The center of the depletion region on the n-side

To prevent a DC return between source and load, it is necessary to use

A. Resistor between source and load

B. Inductor between source and load

C. Capacitor between source and load

D. Either A or B