In permanent mould casting method
A. Molten metal is poured in a metallic mould, retained in the mould long enough for the outer skin to solidify and finally mould is turned over to remove molten metal still in molten condition
B. Molten metal is poured and allowed to solidify while the mould is revolving
C. Molten metal is forced into mould under high pressure
D. None of the above
Answer: Option D
Solution(By Examveda Team)
Permanent mold casting is a metal casting process that employs reusable molds , usually made from metal.The most common process uses gravity to fill the mold, however gas pressure or a vacuum are also used.
The brass and bronze are welded by _________ flame.
A. Neutral
B. Oxidizing
C. Carburising
D. All of these
In TIG arc welding, the welding zone is shielded by an atmosphere of
A. Helium gas
B. Argon gas
C. Either (A) or (B)
D. None of these
In sheet metal blanking, shear is provided on punches and dies so that
A. Press load is reduced
B. Good cut edge is obtained
C. Warping of sheet is minimized
D. Cut blanks is straight
Join The Discussion