Moisture should be removed from refrigerants to avoid
A. Freezing at the expansion valve
B. Restriction to refrigerant flow
C. Corrosion of steel plates
D. All of these
Answer: Option D
Solution(By Examveda Team)
Moisture should be removed from refrigerants to avoid- Freezing at the expansion valve
- Restriction to refrigerant flow
- Corrosion of steel plates
This Question Belongs to Mechanical Engineering >> Refrigeration And Air Conditioning
Nusselt number (NN) is given by
A. $${{\text{N}}_{\text{N}}} = \frac{{{\text{h}}l}}{{\text{k}}}$$
B. $${{\text{N}}_{\text{N}}} = \frac{{\mu {{\text{c}}_{\text{p}}}}}{{\text{k}}}$$
C. $${{\text{N}}_{\text{N}}} = \frac{{\rho {\text{V}}l}}{\mu }$$
D. $${{\text{N}}_{\text{N}}} = \frac{{{{\text{V}}^2}}}{{{\text{t}}{{\text{c}}_{\text{p}}}}}$$
In case of sensible heating of air, the coil efficiency is given by (where B.P.F. = Bypass factor)
A. B.P.F. - 1
B. 1 - B.P.F.
C. $$\frac{1}{{{\text{B}}{\text{.P}}{\text{.F}}{\text{.}}}}$$
D. 1 + B.P.F.
The undesirable property of a refrigerant is
A. Non-toxic
B. Non-flammable
C. Non-explosive
D. High boiling point
The desirable property of a refrigerant is
A. Low boiling point
B. High critical temperature
C. High latent heat of vaporisation
D. All of these
Join The Discussion