The Class-B push-pull amplifier is an efficient two-transistor circuit, in which the two transistors operate in the following way:
A. Both transistors operate in the active region throughout the negative ac cycle
B. Both transistors operate in the active region for more than half-cycle but less than a whole cycle
C. One transistor conducts during the positive half-cycle and the other during the negative half-cycle
D. Full supply voltage appears across each of the transistors
Answer: Option C
This Question Belongs to Electronics And Communications Engineering >> Analog Electronics
The action of JFET in its equivalent circuit can best be represented as a
A. Current controlled Current source
B. Current controlled voltage source
C. Voltage controlled voltage source
D. Voltage controlled current source
In a p+n junction diode under reverse bias, the magnitude of electric field is maximum at
A. The edge of the depletion region on the p-side
B. The edge of the depletion region on the n-side
C. The p+n junction
D. The center of the depletion region on the n-side
To prevent a DC return between source and load, it is necessary to use
A. Resistor between source and load
B. Inductor between source and load
C. Capacitor between source and load
D. Either A or B
Join The Discussion