ExamVeda
Login
Home

The radius of a bar bend to form a hook should...

This question belongs to Civil Engineering RCC Structures Design
RCC Structures Design
?

The radius of a bar bend to form a hook, should not be less than

Answer & Solution
Correct Answer: Option A
Let's discuss the solution. Join the discussion
Examveda
Question posted by Examveda
Community

Join the Discussion

1 Comment
Abhishek Raj
Abhishek Raj 6 years ago
Internal radius of the bend is thrice the diameter and the length of straight bar beyond the end of curve should be least four time the diameter of the bar.
For mild steel - 2 times
For HYSD - 4 times
Keep Learning

Related Questions on RCC Structures Design

Distribution of shear intensity over a rectangular section of a beam, follows:
A. A circular curve B. A straight line C. A parabolic curve D. An elliptical curve
If the shear stress in a R.C.C. beam is
A. Equal or less than 5 kg/cm2, no shear reinforcement is provided B. Greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided C. Greater than 20 kg/cm2, the size of the section is changed D. All the above
In a pre-stressed member it is advisable to use
A. Low strength concrete only B. High strength concrete only C. Low strength concrete but high tensile steel D. High strength concrete and high tensile steel
In a simply supported slab, alternate bars are curtailed at
A. $${\frac{1}{4}^{{\text{th}}}}$$ of the span B. $${\frac{1}{5}^{{\text{th}}}}$$ of the span C. $${\frac{1}{6}^{{\text{th}}}}$$ of the span D. $${\frac{1}{7}^{{\text{th}}}}$$ of the span
More Related Questions on RCC Structures Design