A 2 × 2 ROM array is built with the help of diodes as shown in the circuit below. Here W₀ and W₁ are signals that select the word lines and B₀ and B₁ are signals that are output of the sense amps based on the stored data corresponding to the bit lines during the read operation.
During the read operation, the selected word line goes high and the other word line is in a high impedance state. As per the implementation shown in the circuit diagram above, what are the bits corresponding to D_ij (where i = 0 or 1 and j = 0 or 1) stored in the ROM?

A. \[\left[ \begin{gathered} 1\,\,\,\,\,0 \hfill \\ 0\,\,\,\,\,1 \hfill \\ \end{gathered} \right]\]

B. \[\left[ \begin{gathered} 0\,\,\,\,\,1 \hfill \\ 1\,\,\,\,\,0 \hfill \\ \end{gathered} \right]\]

C. \[\left[ \begin{gathered} 1\,\,\,\,\,0 \hfill \\ 1\,\,\,\,\,0 \hfill \\ \end{gathered} \right]\]

D. \[\left[ \begin{gathered} 1\,\,\,\,\,1 \hfill \\ 0\,\,\,\,\,0 \hfill \\ \end{gathered} \right]\]

Answer: Option A