In order to achieve a specific surface finish in single point turning, the most important factor to be controlled is
A. Depth of cut
B. Cutting speed
C. Feed
D. Tool rake angle
Answer: Option B
Solution(By Examveda Team)
In order to achieve a specific surface finish in single-point turning, the most important factor to be controlled is Cutting Speedother parameters will impact on the surface finish:
-Minimize Deflection and Chatter, Keeping Tool Rigidity Up
-Use Balanced Tooling to Reduce Vibration
-Minimize Runout
Join The Discussion
Comments ( 5 )
Related Questions on Manufacturing and Production Technology
The carbide tools operating at very low cutting speeds (below 30 m/min)
A. Reduces tool life
B. Increases tool life
C. Have no effect on tool life
D. Spoils the work piece
The type of reamer used for reaming operation in a blind hole, is
A. Straight fluted reamer
B. Left hand spiral fluted reamer
C. Right hand spiral fluted reamer
D. Any one of these
High speed steel tools retain their hardness up to a temperature of
A. 250°C
B. 350°C
C. 500°C
D. 900°C
Feed rate is important for surface finishing
Feed rate is important factor
H = (feed)^2/8R
Feed
Feed
for large cutting speed high rake improves surface finish for ductile material
for smaller rake angle and low speed lower surface finish