Pick out the wrong statement.
A. Safety valves are provided in heat exchangers for removal of non-conden-sables
B. Liquid metals and dowtherm are used for very high temperature heating
C. In a shell and tube heat exchanger, high pressure fluid is generally routed through the tube
D. A loop seal or U-seal is provided in a vertical condenser sub-cooler to prevent quick draining of the condensate
Answer: Option A
This Question Belongs to Chemical Engineering >> Process Equipment And Plant Design
Width and depth of grooves in the tube sheet holes normally are __________ inch respectively.
A. $$\frac{1}{8}$$ and $$\frac{1}{{64}}$$
B. $$\frac{1}{{64}}$$ and $$\frac{1}{8}$$
C. $$\frac{1}{2}$$ and 8
D. $$\frac{1}{2}$$ and 5
A. Less than
B. 1.25-1.50 times
C. 2.5 times
D. One-fourth of
Value of Peclet number = 0, is the representative of
A. Laminar flow
B. Complete back mixing
C. Plug flow
D. Eddy diffusivity = 0
Join The Discussion