11. Heat release during phase change is observed in case of a/an
12. For dynamic strain measurement, the wheatstone bridge used is of __________ type.
13. Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is
14. Ammonia leakage in the refrigeration system is detected by
15. Knocking tendency in a petrol engine decreases with increasing
16. Glass reacts with
17. The conventional mechnical transducer, which converts pressure signal to displacement signal is
18. A metal having a Poisson's ratio = 0.3 is elastically deformed under uniaxial tension. If the longitudinal strain = 0.8, then the magnitude of thickness strain is
19. Photographic plates are coated with
20. A fine grained grinding wheel should not be used for grinding __________ materials.
Read More Section(Chemical Engineering Basics)
Each Section contains maximum 100 MCQs question on Chemical Engineering Basics. To get more questions visit other sections.
- Chemical Engineering Basics - Section 1
- Chemical Engineering Basics - Section 2
- Chemical Engineering Basics - Section 3
- Chemical Engineering Basics - Section 4
- Chemical Engineering Basics - Section 5
- Chemical Engineering Basics - Section 6
- Chemical Engineering Basics - Section 8
- Chemical Engineering Basics - Section 9
- Chemical Engineering Basics - Section 10
- Chemical Engineering Basics - Section 11
- Chemical Engineering Basics - Section 12
- Chemical Engineering Basics - Section 13