Railway Engineering MCQ Questions & Answers

Section 1 Section 2

1.
In a shunting signal if the red band is inclined at 45° it indicates

A. Stop

B. Proceed

C. Proceed cautiously

D. None of the above

Answer & Solution Discuss in Board Save for Later

2.
The nominal size of ballast used for points and crossings is

A. 25 mm

B. 40 mm

C. 50 mm

D. 10mm

Answer & Solution Discuss in Board Save for Later

3.
The standard length of rail for Broad Gauge and Meter Gauge are respectively

A. 12 m and 12 m

B. 12 m and 13 m

C. 13 m and 12 m

D. 13 m and 13 m

Answer & Solution Discuss in Board Save for Later

4.
Number of keys used in CST-9 sleeper is

A. 2

B. 3

C. 4

D. none of the above

Answer & Solution Discuss in Board Save for Later

5.
Gauge is the distance between

A. center to center of rails

B. running faces of rails

C. outer faces of rails

D. none of the above

Answer & Solution Discuss in Board Save for Later

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Railway Engineering MCQ Questions & Answers | Civil Engineering

1. In a shunting signal if the red band is inclined at 45° it indicates

Answer & Solution

2. The nominal size of ballast used for points and crossings is

Answer & Solution

3. The standard length of rail for Broad Gauge and Meter Gauge are respectively

Answer & Solution

4. Number of keys used in CST-9 sleeper is

Answer & Solution

5. Gauge is the distance between

Answer & Solution

Read More Section(Railway Engineering)

1.
In a shunting signal if the red band is inclined at 45° it indicates

2.
The nominal size of ballast used for points and crossings is

3.
The standard length of rail for Broad Gauge and Meter Gauge are respectively

4.
Number of keys used in CST-9 sleeper is

5.
Gauge is the distance between