Computer Hardware MCQ Questions & Answers

81

After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the:

A) System's floppy drive device driver B) Original IDE controller C) Floppy drive ribbon cable D) System's power supply E) None of the above

Discuss

Answer & Solution

Answer: Option C

No explanation is given for this question. Let's Discuss on Board

82

What is the best ground for a conductive work bench?

A) AC outlet B) Ground to bench C) To the motherboard D) To the PC's Chassis E) None of the above

Discuss

Answer & Solution

Answer: Option A

No explanation is given for this question. Let's Discuss on Board

83

When you are testing a fuse, you should set the Volt-OHM meter to what scale?

A) AC B) DC C) AMPS D) OHMS E) None of the above

Discuss

Answer & Solution

Answer: Option D

No explanation is given for this question. Let's Discuss on Board

84

During boot-up, the memory test:

A) Is a superfluous step that should be ignored B) Checks and verifies that contiguous memory is installed C) Is an operational error D) Displays what memory is installed, but nothing else E) None of the above

Discuss

Answer & Solution

Answer: Option B

Solution:

During the boot-up process, the memory test:

Checks and verifies that contiguous memory is installed.

This step is crucial as it ensures that the system has the required memory for proper operation and that there are no issues with the installed memory modules.

It helps identify any problems with the memory, such as missing or faulty modules, ensuring that the system can function correctly.

85

A customer has just installed a new cd-rw. the system was working fine before the installation, but now the cdrom does not work, what should you suggest that the customer do?

A) flash or upgrade the BIOS B) check the CONFIG.SYS C) add cdrw in the device manager D) check the jumper setting on the cd-rw E) None of the above

Discuss

Answer & Solution

Answer: Option D

No explanation is given for this question. Let's Discuss on Board

86

Which is the most difficult environmentally to dispose of?

A) floppy drives B) hard drives C) power supplies D) CRTs E) system boards

Discuss

Answer & Solution

Answer: Option D

No explanation is given for this question. Let's Discuss on Board

87

Resistance is measured:

A) in parallel B) in series C) after breaking the circuit D) after checking voltage E) after checking current

Discuss

Answer & Solution

Answer: Option C

No explanation is given for this question. Let's Discuss on Board

88

Which is LEAST likely to interfere with upgrading to a newer DOS Version?

A) ROM BIOS B) Video controller C) Compressed drives D) Existing backup files E) None of the above

Discuss

Answer & Solution

Answer: Option B

No explanation is given for this question. Let's Discuss on Board

89

How may standard levels of interrupts are provided on the 8-bit ISA bus (XT-class computer)?

A) 4 B) 8 C) 12 D) 16 E) None of the above

Discuss

Answer & Solution

Answer: Option B

No explanation is given for this question. Let's Discuss on Board

90

"Parity" errors usually indicate bad memory

A) True B) FALSE C) LPT2 D) The modem E) None of the above

Discuss

Answer & Solution

Answer: Option A

No explanation is given for this question. Let's Discuss on Board

Computer Hardware MCQ Questions & Answers | Computer Science