ExamVeda
Login
Home
1
If n1 and n2 are the refractive indices of the core and cladding respectively, the maximum acceptance angle at the air-core interface should be
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
2
For a single mode optical cable with 0.25 dB/km loss, the optical power 100 km from a 0.1 mW source will be . . . . . . . .
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
3
Numerical aperture is describing the ability of
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
4
The distortion in the transmission of carrier frequencies in an underground cable can be eliminated by using
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
5
A single mode fiber does not suffer from which type of dispersion?
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
6
The sources for fibre optical communication is
Discuss
Answer & Solution
Answer: Option D
No explanation is given for this question. Let's Discuss on Board
7
The critical angle θc in an optical fiber is given by . . . . . . . . Where n1 is refractive index of medium 1 and n2 is the refractive index of medium 2.
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
8
The configuration used by a line communication system capable of transmitting a data at the rate of 1000 Mbps is
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
9
Some of the diffracted light continues down the fiber and some of it escapes through the cladding. The light rays that escape represent a loss in light power which is called
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
10
An optical fiber cable laid underground has developed a discontinuity at a distance d from the source end. The fault can be located using the instrument
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board