In a refrigeration cycle, the flow of refrigerant is controlled by
A. Compressor
B. Condenser
C. Evaporator
D. Expansion valve
Answer: Option D
Solution(By Examveda Team)
The refrigerant vaporizes from the heat it absorbs heat in the evaporator. Flow control device (expansion valve): This controls the flow of the liquid refrigerant into the evaporator. Control devices usually are thermostatic, meaning that they are responsive to the temperature of the refrigerant.Nusselt number (NN) is given by
A. $${{\text{N}}_{\text{N}}} = \frac{{{\text{h}}l}}{{\text{k}}}$$
B. $${{\text{N}}_{\text{N}}} = \frac{{\mu {{\text{c}}_{\text{p}}}}}{{\text{k}}}$$
C. $${{\text{N}}_{\text{N}}} = \frac{{\rho {\text{V}}l}}{\mu }$$
D. $${{\text{N}}_{\text{N}}} = \frac{{{{\text{V}}^2}}}{{{\text{t}}{{\text{c}}_{\text{p}}}}}$$
In case of sensible heating of air, the coil efficiency is given by (where B.P.F. = Bypass factor)
A. B.P.F. - 1
B. 1 - B.P.F.
C. $$\frac{1}{{{\text{B}}{\text{.P}}{\text{.F}}{\text{.}}}}$$
D. 1 + B.P.F.
The undesirable property of a refrigerant is
A. Non-toxic
B. Non-flammable
C. Non-explosive
D. High boiling point
The desirable property of a refrigerant is
A. Low boiling point
B. High critical temperature
C. High latent heat of vaporisation
D. All of these
Join The Discussion