In a vapour compression system, the condition of refrigerant is dry saturated vapour
A. Before entering the compressor
B. After leaving the compressor
C. Before entering the condenser
D. After leaving the condenser
Answer: Option A
Solution(By Examveda Team)
In a vapour compression system, the condition of refrigerant is dry saturated vapour Before entering the compressorThis Question Belongs to Mechanical Engineering >> Refrigeration And Air Conditioning
Join The Discussion
Comments ( 1 )
Nusselt number (NN) is given by
A. $${{\text{N}}_{\text{N}}} = \frac{{{\text{h}}l}}{{\text{k}}}$$
B. $${{\text{N}}_{\text{N}}} = \frac{{\mu {{\text{c}}_{\text{p}}}}}{{\text{k}}}$$
C. $${{\text{N}}_{\text{N}}} = \frac{{\rho {\text{V}}l}}{\mu }$$
D. $${{\text{N}}_{\text{N}}} = \frac{{{{\text{V}}^2}}}{{{\text{t}}{{\text{c}}_{\text{p}}}}}$$
In case of sensible heating of air, the coil efficiency is given by (where B.P.F. = Bypass factor)
A. B.P.F. - 1
B. 1 - B.P.F.
C. $$\frac{1}{{{\text{B}}{\text{.P}}{\text{.F}}{\text{.}}}}$$
D. 1 + B.P.F.
The undesirable property of a refrigerant is
A. Non-toxic
B. Non-flammable
C. Non-explosive
D. High boiling point
The desirable property of a refrigerant is
A. Low boiling point
B. High critical temperature
C. High latent heat of vaporisation
D. All of these
answer is wrong it happens only in case of superheating in general refrigerent is in dry saturated state after compressor or before entering to condensor