ExamVeda
Login
Home

In testing a pile by load test pile platform is loaded...

This question belongs to Civil Engineering RCC Structures Design
RCC Structures Design
?

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed

Answer & Solution
Correct Answer: Option D
Let's discuss the solution. Join the discussion
Examveda
Question posted by Examveda
Community

Join the Discussion

No comments yet Be the first to discuss this question.
Keep Learning

Related Questions on RCC Structures Design

Distribution of shear intensity over a rectangular section of a beam, follows:
A. A circular curve B. A straight line C. A parabolic curve D. An elliptical curve
If the shear stress in a R.C.C. beam is
A. Equal or less than 5 kg/cm2, no shear reinforcement is provided B. Greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided C. Greater than 20 kg/cm2, the size of the section is changed D. All the above
In a pre-stressed member it is advisable to use
A. Low strength concrete only B. High strength concrete only C. Low strength concrete but high tensile steel D. High strength concrete and high tensile steel
In a simply supported slab, alternate bars are curtailed at
A. $${\frac{1}{4}^{{\text{th}}}}$$ of the span B. $${\frac{1}{5}^{{\text{th}}}}$$ of the span C. $${\frac{1}{6}^{{\text{th}}}}$$ of the span D. $${\frac{1}{7}^{{\text{th}}}}$$ of the span
More Related Questions on RCC Structures Design