In vapour compression cycle the condition off refrigerant is dry saturated vapour
A. After passing through the condenser
B. Before passing through the condenser
C. After passing through the expansion or throttle valve
D. Before entering the compressor
Answer: Option D
Solution(By Examveda Team)
In vapour compression cycle the condition off refrigerant is dry saturated vapour Before entering the compressorJoin The Discussion
Comments ( 1 )
Nusselt number (NN) is given by
A. $${{\text{N}}_{\text{N}}} = \frac{{{\text{h}}l}}{{\text{k}}}$$
B. $${{\text{N}}_{\text{N}}} = \frac{{\mu {{\text{c}}_{\text{p}}}}}{{\text{k}}}$$
C. $${{\text{N}}_{\text{N}}} = \frac{{\rho {\text{V}}l}}{\mu }$$
D. $${{\text{N}}_{\text{N}}} = \frac{{{{\text{V}}^2}}}{{{\text{t}}{{\text{c}}_{\text{p}}}}}$$
In case of sensible heating of air, the coil efficiency is given by (where B.P.F. = Bypass factor)
A. B.P.F. - 1
B. 1 - B.P.F.
C. $$\frac{1}{{{\text{B}}{\text{.P}}{\text{.F}}{\text{.}}}}$$
D. 1 + B.P.F.
The undesirable property of a refrigerant is
A. Non-toxic
B. Non-flammable
C. Non-explosive
D. High boiling point
The desirable property of a refrigerant is
A. Low boiling point
B. High critical temperature
C. High latent heat of vaporisation
D. All of these
Correct answer is after passing through compressor. Because After the compression all the reaming liquid part is converted into vapour in compressor of VCR. Before compression due to uneven cooling may be it's possibility for remaining some liquid part during evaporation.