ExamVeda
Login
Home

Maximum principal stress theory for the failure of a material at...

This question belongs to Civil Engineering Theory Of Structures
Theory of Structures
?

Maximum principal stress theory for the failure of a material at elastic point, is known

Answer & Solution
Correct Answer: Option C
Let's discuss the solution. Join the discussion
Examveda
Question posted by Examveda
Community

Join the Discussion

No comments yet Be the first to discuss this question.
Keep Learning

Related Questions on Theory of Structures

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A. $$\frac{2}{3}$$ B. $$\frac{3}{2}$$ C. $$\frac{5}{8}$$ D. $$\frac{8}{5}$$
Principal planes are subjected to
A. Normal stresses only B. Tangential stresses only C. Normal stresses as well as tangential stresses D. None of these
Y are the bending moment, moment of inertia, radius of curvature, modulus of If M, I, R, E, F and elasticity stress and the depth of the neutral axis at section, then
A. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{R}}}{{\text{E}}} = \frac{{\text{F}}}{{\text{Y}}}$$ B. $$\frac{{\text{I}}}{{\text{M}}} = \frac{{\text{R}}}{{\text{E}}} = \frac{{\text{F}}}{{\text{Y}}}$$ C. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{E}}}{{\text{R}}} = \frac{{\text{F}}}{{\text{Y}}}$$ D. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{E}}}{{\text{R}}} = \frac{{\text{Y}}}{{\text{F}}}$$
A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is
A. $$\frac{{\text{M}}}{{\text{T}}}$$ B. $$\frac{{\text{T}}}{{\text{M}}}$$ C. $$\frac{{2{\text{M}}}}{{\text{T}}}$$ D. $$\frac{{2{\text{T}}}}{{\text{M}}}$$
More Related Questions on Theory of Structures