A. Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
B. The wind data of an air port is depicted in the form of a chart known as wind rose
C. The landing and takeoff of the air craft is made against the wind direction
D. All the above
Answer: Option D
This Question Belongs to Civil Engineering >> Airport Engineering
As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Effective length of a runway is the distance between
A. Ends of the runway
B. Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C. Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D. Ends of the clear way on either side
The size of landing area for multi engine helicopters operating under 1 FR conditions is
A. 22.5 m × 22.5 m
B. 30 m × 30 m
C. 22.5 m × 30 m
D. 60 m × 120 m
Join The Discussion