A. Approximate geometric centre of the landing area, is called air port reference point
B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
C. The location of the air port on a map is the position of air port reference point
D. All the above
Answer: Option D
This Question Belongs to Civil Engineering >> Airport Engineering
As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Effective length of a runway is the distance between
A. Ends of the runway
B. Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C. Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D. Ends of the clear way on either side
The size of landing area for multi engine helicopters operating under 1 FR conditions is
A. 22.5 m × 22.5 m
B. 30 m × 30 m
C. 22.5 m × 30 m
D. 60 m × 120 m
Join The Discussion