The Corporate router receives an IP packet with a source IP...

This question belongs to Networking IP Routing

IP Routing

The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet?

Corp#sh ip route
[output cut]
R    192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0
R    192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
R    192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
C    192.168.20.0 is directly connected, Serial0/0
C    192.168.214.0 is directly connected, FastEthernet0/0

A) The packet will be discarded. B) The packet will be routed out the S0/0 interface. C) The router will broadcast looking for the destination. D) The packet will be routed out the Fa0/0 interface. E) They will all load-balance.

Answer & Solution

Correct Answer: Option A

Since the routing table shows no route to the 192.168.22.0 network, the router will discard the packet and send an ICMP destination unreachable message out interface FastEthernet 0/0, which is the source LAN where the packet originated from.

Question posted by Examveda

Community

Join the Discussion

Join the discussion

No comments yet Be the first to discuss this question.

Keep Learning

Related Questions on IP Routing

You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?

R    192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0
C    192.168.40.0/24 is directly connected, Serial0
     172.16.0.0/24 is subnetted, 1 subnets
C    172.16.30.0 is directly connected, Loopback0
R    192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0
R    10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0
C    192.168.50.0/24 is directly connected, Ethernet0