ExamVeda
Login
Home

The ratio of crippling loads of a column having both the...

This question belongs to Civil Engineering Theory Of Structures
Theory of Structures
?

The ratio of crippling loads of a column having both the ends fixed to the column having both the ends hinged, is

Answer & Solution
Correct Answer: Option D
Let's discuss the solution. Join the discussion
Examveda
Question posted by Examveda
Community

Join the Discussion

1 Comment
Shahzad Khan
Shahzad Khan 5 years ago
1) for both end fixed = 4* pi* EI/Le2
2) for both end hinged = pi*EI/Le2
Ratio of 1/2 = 4
Keep Learning

Related Questions on Theory of Structures

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A. $$\frac{2}{3}$$ B. $$\frac{3}{2}$$ C. $$\frac{5}{8}$$ D. $$\frac{8}{5}$$
Principal planes are subjected to
A. Normal stresses only B. Tangential stresses only C. Normal stresses as well as tangential stresses D. None of these
Y are the bending moment, moment of inertia, radius of curvature, modulus of If M, I, R, E, F and elasticity stress and the depth of the neutral axis at section, then
A. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{R}}}{{\text{E}}} = \frac{{\text{F}}}{{\text{Y}}}$$ B. $$\frac{{\text{I}}}{{\text{M}}} = \frac{{\text{R}}}{{\text{E}}} = \frac{{\text{F}}}{{\text{Y}}}$$ C. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{E}}}{{\text{R}}} = \frac{{\text{F}}}{{\text{Y}}}$$ D. $$\frac{{\text{M}}}{{\text{I}}} = \frac{{\text{E}}}{{\text{R}}} = \frac{{\text{Y}}}{{\text{F}}}$$
A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is
A. $$\frac{{\text{M}}}{{\text{T}}}$$ B. $$\frac{{\text{T}}}{{\text{M}}}$$ C. $$\frac{{2{\text{M}}}}{{\text{T}}}$$ D. $$\frac{{2{\text{T}}}}{{\text{M}}}$$
More Related Questions on Theory of Structures