When a transistor is connected in common emitter mode, it with have
A. Negligible input resistance and high output resistance
B. High input resistance and low output resistance
C. Medium input resistance and high output resistance
D. Low input resistance as well as output resistance
Answer: Option C
This Question Belongs to Electronics And Communications Engineering >> Analog Electronics
Join The Discussion
Comments ( 1 )
The action of JFET in its equivalent circuit can best be represented as a
A. Current controlled Current source
B. Current controlled voltage source
C. Voltage controlled voltage source
D. Voltage controlled current source
In a p+n junction diode under reverse bias, the magnitude of electric field is maximum at
A. The edge of the depletion region on the p-side
B. The edge of the depletion region on the n-side
C. The p+n junction
D. The center of the depletion region on the n-side
To prevent a DC return between source and load, it is necessary to use
A. Resistor between source and load
B. Inductor between source and load
C. Capacitor between source and load
D. Either A or B
both ip impedance and output impedance will be in medium range