ExamVeda
Login
Home
91
Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis.
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
92
During its calorific value determination by bomb calorimeter, coal is combusted by
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
93
Orsat apparatus
Discuss
Answer & Solution
Answer: Option D
No explanation is given for this question. Let's Discuss on Board
94
Orsat apparatus is meant for
Discuss
Answer & Solution
Answer: Option D
Solution:
The Orsat apparatus is used for the volumetric analysis of flue gases produced during combustion. It determines the percentage composition of different gases present in the flue gas by using selective chemical absorption.

The three major gases commonly analyzed using the Orsat apparatus are:

1. Carbon Dioxide (CO₂): Absorbed by Potassium Hydroxide (KOH).
2. Oxygen (O₂): Absorbed by alkaline pyrogallol.
3. Carbon Monoxide (CO): Absorbed by ammoniacal cuprous chloride.

What about Nitrogen (N₂)?
Nitrogen is not directly determined by absorption in the Orsat apparatus. Its percentage is generally calculated by difference after measuring the other gas constituents.

Why are the given options incorrect?

Option A: Gravimetric analysis of flue gas – Incorrect.
Gravimetric analysis is based on measuring the mass of a substance. The Orsat apparatus works on the principle of volumetric gas analysis, not gravimetric analysis.

Option B: Finding out combustion efficiency – Incorrect.
The Orsat apparatus does not directly measure combustion efficiency. It determines the volumetric composition of flue gases, and the obtained results can subsequently be used to assess combustion performance.

Option C: Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride – Incorrect.
Ammoniacal cuprous chloride selectively absorbs carbon monoxide (CO), not nitrogen (N₂). Nitrogen is generally determined by difference.

Therefore, none of the given options correctly describes the primary function of the Orsat apparatus. Hence, Option D (None of these) is the correct answer.
95
'Fat coals' are those coals which have very high
Discuss
Answer & Solution
Answer: Option A
Solution:
Let's understand what Fat Coals are and why caking capacity is the correct answer.

What are Fat Coals?
In coal classification, the term "fat" does not mean oily or greasy. It refers to a type of bituminous coal that exhibits a strong tendency to soften, swell and fuse together when heated in the absence of air. Such coals are commonly associated with coking properties.

What is Caking Capacity?
Caking capacity refers to the ability of coal to soften and stick together when heated in the absence of air. During this process, coal undergoes three important changes:

1. Softening: Coal becomes plastic or soft when heated.
2. Swelling: The softened coal may expand in volume.
3. Re-solidification: The plastic mass hardens on further heating and forms a solid, porous mass called coke.

Why is Option A correct?
Fat coals are particularly known for their high caking capacity. This property makes them valuable in the production of metallurgical coke, which is widely used in blast furnaces during iron and steel manufacturing.

Why are the other options incorrect?

Option B: Volatile matter content – Incorrect.
Volatile matter refers to the gases and vapours released when coal is heated in the absence of air. Although volatile matter influences the coking behaviour of coal, it is not the defining characteristic of fat coal.

Option C: Fusion point of its ash – Incorrect.
Ash fusion point indicates the temperature at which coal ash begins to soften and melt. It is important in boiler operation but does not determine the caking capacity of coal.

Option D: Inherent moisture content – Incorrect.
Inherent moisture refers to the water naturally retained within the coal structure. It is not the characteristic used to classify coal as fat coal.

Therefore, fat coals are characterized by their very high caking capacity. Hence, Option A is correct.
96
__________ has the widest inflammability limit (explosion limit) of all the gases.
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
97
Presence of force moisture in coal is most disadvantageous during its
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
98
Producer gas containing least amount of tar is produced by the
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
99
Coke oven gas constitutes mainly of
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
100
Which of the following is a poisonous fuel gas?
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board