ExamVeda
Login
Home
11
Pick out the system with maximum boiling azeotrope at 1 atm.
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
12
Leaching of uranium ore and gold ore is done in
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
13
Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is: N + 2 = 6 log $$\left( {\frac{{{{\text{y}}_{{\text{in}}}}}}{{{{\text{y}}_{{\text{out}}}}}}} \right).$$
For 98% recovery of acetone, the number of trays required is/are
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
14
The fixed cost of a distillation column at minimum reflux ratio is
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
15
The operating cost of a distillation column at minimum reflux ratio is
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
16
Drying operation under vacuum is carried out to
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
17
Unit of molal diffusivity is
Discuss
Answer & Solution
Answer: Option A
Solution:
Molal diffusivity (Dm) is a measure of how quickly a substance diffuses through a solvent when there is a concentration gradient between them.

The unit of molal diffusivity is typically expressed in terms of square centimeters per second (cm2/s) multiplied by the number of grams (gm) of the solute per mole (mole) of the solute.

So, the correct unit for molal diffusivity is cm2/sec gm.mole, which corresponds to option A.
18
__________ temperature is the steady state temperature attained by a small amount of liquid evaporating into a large quantity of unsaturated gas-vapor mixture.
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
19
In a counter-current liquid extractor
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
20
Equilibrium-moisture curves of different solids
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board