31. A permanent magnet moving coil ammeter has a coil resistance of 99ohm and Full Scale DeflectionFSD. current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is
32. The chemical effect of current is used in
33. Some wire- wound resistors have bifilar winding. This type of winding is used to
34. The pressure coil of a wattmeter should be connected on the supply side of the current coil when
35. A resistor of 10 kΩ with 5% tolerance is connected in parallel with a 5 kΩ resistor of 10% tolerance. What is the tolerance limit for the parallel network?
36. It is found that 10A current passes through a resistor of 10°hms. The resistor has 5% tolerance . The error in measurement of current can be as high as 5%. What is max error in measurement of power, calculated from measured value of I and the nominal value of resistor?
37. The EMF of Weston standard cell is measured using
38. A mulliammeter can be used as
39. Wagner earthing device is used to eliminate errors due to
40. The multiplier and the meter coil in a voltmeter are in
Read More Section(Measurement and Instrumentation)
Each Section contains maximum 100 MCQs question on Measurement and Instrumentation. To get more questions visit other sections.