ExamVeda
Login
Home

In a laboratory test run the rate of drying was found...

This question belongs to Chemical Engineering Heat Transfer
Heat Transfer
?

In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is

Answer & Solution
Correct Answer: Option C
Let's discuss the solution. Join the discussion
Examveda
Question posted by Examveda
Community

Join the Discussion

No comments yet Be the first to discuss this question.
Keep Learning

Related Questions on Heat Transfer

200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
A. 0.5 B. 0.05 C. 0.1 D. 0.15
It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/(kgK). The rate at which the heat has to be supplied in (kJ/min) to the evaporator is
A. 3.06 × 105 B. 6.12 × 105 C. 7.24 × 105 D. 9.08 × 105
Fqra cold viscous feed, backward feed gives __________ than forward feed.
A. A higher capacity B. A lower capacity C. Lower economy D. None of these
In a multipass shell and tube heat exchanger, tube side return pressure loss is equal to __________ the velocity head.
A. Twice B. Four times C. Square root of D. Square of
More Related Questions on Heat Transfer