ExamVeda
Login
Home
41
Which of the following is a desirable characteristic of an instrument?
Discuss
Answer & Solution
Answer: Option B
Solution:
Instruments used for process control and measurement are expected to provide accurate, reliable, and consistent readings of process variables such as pressure, temperature, flow, and level.

A desirable characteristic of a good instrument is high fidelity, which means the instrument is capable of accurately reproducing the input signal without distortion or delay.

High fidelity ensures that the output of the instrument truly represents the measured variable and responds correctly to rapid changes in the process conditions.

On the other hand:

High drift (Option A) is undesirable because it causes the instrument reading to change with time even when the measured variable remains constant.

High measuring lag (Option C) is also undesirable because it delays the instrument’s response to changes in the input signal, reducing accuracy in dynamic systems.

Poor reproducibility (Option D) means the instrument cannot produce the same reading under identical conditions, which affects reliability and consistency.

Therefore, the most desirable characteristic of an instrument is high fidelity.

Hence, the correct answer is Option B: High fidelity.
42
__________ is the static characteristics of an instrument,
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
43
A first order system with a time constant of 1 min is subjected to frequency response analysis. At an input frequency of 1 radian/min, the phase shift is
Discuss
Answer & Solution
Answer: Option D
No explanation is given for this question. Let's Discuss on Board
44
Photoelectric pyrometers are suitable in the temperature range of __________ °C.
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
45
A mercury thermometer can not be used to measure the temperature below the freezing point of mercury, which is __________ °C.
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
46
Mercury thermometer is commonly used for low temperature measruement. The freezing point and boiling point of mercury are respectively __________ °C.
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board
47
Load cells are used for the measurement of
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
48
Thermistors are used in __________ devices.
Discuss
Answer & Solution
Answer: Option D
No explanation is given for this question. Let's Discuss on Board
49
The amplitude ratio for the sinusoidal response of __________ is < 1.
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
50
The amplitude ratio for the sinusoidal response of a __________ is 1.
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board