ExamVeda
Login
Home
61
The semiconductor bar is heated at one end, a voltage across the bar is developed. If the heated end is positive, the semiconductor is
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
62
In PN-junction diode, if doping concentration of acceptor atoms in P-region is increased then
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
63
The output current versus input voltage transfer characteristics of an n-channel JFET is such that there is
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
64
Which of the following is correct?
Discuss
Answer & Solution
Answer: Option D
No explanation is given for this question. Let's Discuss on Board
65
Identify the correct statement about MOS capacitor-
Discuss
Answer & Solution
Answer: Option D
Solution:
A MOS capacitor consists of a metal gate, oxide layer, and semiconductor substrate. The behavior of the surface region depends on the type of substrate and the polarity of the applied gate voltage.

For a P-type substrate with positive gate voltage: The applied positive potential repels holes (majority carriers) away from the surface and attracts electrons (minority carriers) towards the oxide–semiconductor interface. This leads to the formation of an N-type inversion layer. Hence, Option D is correct.

Option A: Incorrect, because in an N-type substrate under negative voltage, holes move towards the surface causing accumulation, not inversion.

Option B: Incorrect, because in a P-type substrate with negative voltage, holes are attracted to the surface, again causing accumulation, not inversion.

Option C: Incorrect, because in an N-type substrate with positive voltage, electrons accumulate at the surface, leading to accumulation only, not inversion.

Therefore, the correct statement is Option D.
66
. . . . . . . . of the varactor-diode changes with the change in applied voltage.
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
67
The reverse saturation current of a silicon diode doubles for every
Discuss
Answer & Solution
Answer: Option B
No explanation is given for this question. Let's Discuss on Board
68
The leakage current in CE configuration may be around
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
69
For the 2N338 transistor, the manufacturer specifies Pmax = 100 mW at 25°C free air temperature and the maximum junction temperature, Tjmax = 125°C. Its thermal resistance is
Discuss
Answer & Solution
Answer: Option C
No explanation is given for this question. Let's Discuss on Board
70
The band gap energies for silicon and germanium photodiodes are 1.1 eV and 0.67 eV respectively, their cutoff wavelength respectively would be:
Discuss
Answer & Solution
Answer: Option A
No explanation is given for this question. Let's Discuss on Board